Hello Eka
Can you send me or tell me details releted to replace defective floppy drive in vrs1 controller
If you tell something it is very appreciable
Posts by Egaleskay
-
-
Hi
I just purchased a Kuka VK360 with the VRS1 v1.10a, to be used for feeding CNC ,I'm looking for programming manuals or manuals in general in English, I already have some in German, but my German is not that strong, so the English ones would help a lot?
I'm also looking for Key disc, or just what is on it, or how to create one?
Bonus if you have some tips and tricks this is greatly appreciated too?
MackSent from my LG-D686
-
Hi
Now m working on vw robot vk360/125/150 with SEF controllerWhen I am going to change some consant at that time robot shows error like that
"key disk is missing".
So what should I do,
Plz tell me solution if someone is know about that.Mack
Sent from my LG-D686
-
dear sir i having problem to run fanuc robot with auto cycle
plz tell me the procedure
which signal becomes low for which condition
& which signal always high except fault condition. -
dear sir,
i am new for kuka, so plz tell me how to simulate kuka robot input -
Dear Sir ,
now i want to do work on mig welding on fanuc robot.
but i don't know about mig welding .
so please give me robotic mig welding manual.
Regards,
Vaibhav Khadse -
Dear sir
Today we are facing problem in fanuc robot
Problem : servo -062 alarm in Fanuc ROBOT
Action : we are check the BATTERY voltage , checked ok
we check that battery 6v is reach at pulse coder, while , robot shows srvo-062 bzal alarm.
i can not find out that problem.
& how can i solve this problem.
i need why this problem happen frequently , and what is the root cause of this issue https://www.robot-forum.com/robotforum/Smi…glyhammer_2.gifpl tell me the root cause and why its happen , where i to check
Regards
vaibhav khadse -
i you want to change the language of rj2 robot
you have to fallow below step
press 1) menu
2)next
3)system
4) variable
go to language variable & press default
after that
you have to do
1) menu
2) setup
3) f1
4) general setup
you see 3 no. option for current language change
select that option & press ok you see two option
1) japanese
2) english
select 2 for english language
after that you see your language is change to english.