Never mind, I have found that the Multiplexer board is bad causing this error. Thank you for your help!!
Posts by robmx57
-
-
You also want to make sure that you are not logging images. This will take up a lot of memory and may cause the controller to lock up. We have ran into this problem before...
-
Someone please help!!! Our high priority robot is down and I cant seem to figure out what the problem is... I am going to try and replace the multiplexer board tomorrow to see if that will correct this issue. I have been searching the web all day and cant seem to find any explanation as to what to do with this. It would be GREATLY appreciated if someone could help with this problem!!!!! p.s.-everything was working fine, then all of the sudden....
-
Hello,
I have to increase the size of my FROM/SRAM in my robot controller and I cant seem to locate the software installation manual anywhere. Does anyone have one they would share with me? Thank you! -
Hello,
I was wondering if anyone has used this app before? If so, what all do you have to have connected to make it work properly?
Thanks -
Hello Everyone,
My company wants to set up an automated cell in order to machine brake rotors. The brake rotors are a rotor/hub combination. We will be using 2 VTL's for the machining and a Fanuc Robot for handling. My question is: How are other companies receiving their parts from the foundry for this type of task and also how are they shipping them to their customer? As of right now we plan on using Ir Vision for picking the raw parts, but if we can get them delivered pre-oriented we wouldn't need vision.Any input on this would be greatly appreciated.
Thank you!
-
Thanks for the info!
-
Hello Everyone,
I am in the process of picking out replacement parts for our robot cells and was wanting to get a spare Teach Pendant cable. I stumbled across some retractable cable reels specifically made for our controllers teach pendants and was wanting to get a general opinion on how well everyone likes them or dislikes them and why. This would be of great help to me as I have never used one of these.Thank you!!
-
Perfect, Thank you very much. Also, can you interchange the teach pendants from one cell, of a different year, to another cell?
Thanks. -
Hello everyone,
I was wondering how to find out what teach pendant and TP cable our robot has. Is there a # somewhere or should I be looking in the documentation that was sent with it. Any help would be much appreciated.
Thanks,
Rob