hmm , oke thanek you for your replys and your help
Posts by oguz88
-
-
I didn't create any virtual robot besause our system resposibles are made it and we just take and use .
But , when i tried this option , i didn't connect to RCS . i used with just RSS .
This is imporant for when work with RSS ?
-
For examble ;
where can ı set line traking opsiyon on OLP command or outher where ?
Who know ?
-
It likes yours , i can't select mecanical unit and i don't know how can i do it .
I know the procedure for linear traking with real robot and i used same procedure for do it with process simulate.
If i can set active mecanical unit maybe i can do it.
-
Who can help me about it ? It's very urgent for me . pls
-
Helle every one , I work on line tracking with ABB robot and i send this fault mesage from simulation panel .
who can help me about it ?
-
Thank you for yours reply
-
But if you want to use FANUC or MOTOMAN . you can select MOTOMAN , because this robots mechanisms is very strong and very good . You can be work with the SAMES company .
-
I used ABB paint robot and if i have a second chance , i prefer DURR robots. Because interface is so easy and paint parameter system is wery well working . Interface of the parameter system very easy and if you want to same change abouth the parameter , you can do it so easly and fastly .
-
Hello every one , I don't understand very well abouth the X11 sokect label , some people can help me ?
Can you tell the label means ?
Thank you .
-
Thanks a lot sky , you was tell so good .
-
Hi , every one
I don't understand , how is it the bit number configurations for analog chanel
ANOUT1=50,2,12,0 ;$OUT[217-232]
ANOUT2=50,4,12,0 ;$OUT[233-248]can you tell me ?
-
Hi ,
I need to SEF robot manuel document . Do you have some budy this document .Thanks.
-
click connect button on cf5 softwer after you have to enter ip adress of the robot on c5g softwer and you must define connections type .
thats all .