it's an KRC 2.
I've somewhere on this forum seen a post about some files to run.
but those are not present, or i cant find them on the controller
Posts by zero_crash
-
-
Hi all,
i have a question about a kuka robot.
i would like to connect an external vga monitor to the robot, however, i don't get it working.if i connect the external vga, the screen stays black.
if i go searching in the windows enviroment, control panel, display, settings, advanced, .. i can only select single screen, under the chips tab.is there some setting to be done? or is there a way to gt it working?
thanks in advance!
-
i've a question about programming an kuka robot.
is it possible to use 8 digital inputs of the robot, and read them inside a program as an input word with integer value?
like:
if iw[0] == 8 then
..
endifin this case the inputs are following: 00001000
-
the software is lasertech v2.2.0 and kuka krc v5.6.8
i'm running and testing the program in #aut
-
hi all,
i am currently trying to configure kuka lasertech to work whith a trumpf laser welder, but i have a problem.
in the configurator, tabpage proces settings, the variable " run program whithout laser" is automaticaly set as soon as i exit the configurator.
what could be the reason behind this?
how can i solve this problem?
thanks