thank you so much
but really i dont have any serial number.
Posts by ebb
-
-
I need Irb2400 s4 M97A controller diskkete, too.
Please, -
after two years
Im waiting for sombody give it me.
My robot serial number is vanished and i can not take it from abb. -
please be carfule about controller battery
I lost it before and i have a dead robot
at the end:
I have a IRB2400 with s4 controller and i lost My flappy diskette
i don't have serial number, its vanished
and i can not take it from abb
Can you share it with me, please? -
dear katkat
teach pendant is ok, i think
i think you have problem with boot up.
which one is your controller:
S4 or S4C or S4C+ or IR5? -
if you use S4 or s4c+
the problem is:
your hard disk is full. -
Hello Dears
i need key disk of M98 IRB6400
Thanks a lot
-
Thanks a lot for your info
-
i done it befor with I/F panel
If you need tell me to send a sample -
-
hello dears
i need IRB6400 m98 s4 key disk and system pack.
Please help meeeeee
pleaseeeeeeeeee -
hello
can i change language in s4 controller with I-start
i can not find manual for s4 i only can find m98 s4c manual
in s4c its possible but i dont know is it possible in s4 or not.
i can not make cold start cause i dont have key disk. -
there is not anybody in this big word that have S4 m97 Irb2400?
-
one time i had this problem and its ok now
remove your cpu clean it with air pressure
i hope it will be ok.and also check your battery backup voltage.
its not so related but some time it make some strange problem
and your robot dose not have any alarm about battery. -
hello friends
i have IRB2400 M97 s4 controller.
i lost my key disk and also i lost abb lable in front o controller then i dont have any serial number.
i had a cold start because of battery and i need key diskette.
i had a lot of s4c and s4c+ diskette but i need S4 key disk.Please help me im trying find it for 1 year.
-
you have a problem in your program.
dont worry about teach pendant -
i had this problem.
i changed joy stick and its OK now.
when i released joy stick it moved for some second.
but i had joystick error in top of pendant screen. -
thanks for everybody
i will check my board.
my flash and teach pendant are ok
-
i test teach pendant in another controller its ok
i changed flash drive
and its ok
i put it inside another controller and it be ok.what do you think about cpu?
-
thanks for your reply
yes some time it ask me restore an image file.
do you mean i removed this image?
may it make me problem after removing this image?cause i have 2 controller and i use frome this pendant for both.
in one of this controller after 300 second
it apear a message about image.