Posts by MOM
-
-
Hi,
it was interesting what you were are talking about. Unfortanetly I am completely lost and I have no idea what you are actually talking about.
Starting with KSS V7 kuka changed from FTP to CIFS(Common Internet File System).
Just check this out:
If you want to add a directory create directory and add a specific user to it
If you want to add a specific user add the user and before create a password for him.
Afterwards you are able to check whether your try of connection was successful you can see that on "#client connections". If value would be still "0" you made a mistake, otherwise congratulation you did a great job.
-
just to summarize:
whatever you will get for free from KUKA - you already have it
For the rest you have to pay
Once at a time KUKA will find all the black sheep
-
I need 100.000 $, where can I get it
just order it from kuka.
Give them the serial number of your robot. with this information they find out what kss version you have and tell you what version you need and how much it will cost.
-
-
you also do not have the correct main board (must be at least a 733 MHz from Soyo).
Internal kuka documentation says: not supperted but maybe possible.
On the other hand KSS V4.1 is using Win95 as OS, KSS V5.x is using WinXPe as OS => maybe license problem as well (unless you habe bought KSS V5.x officially).
-
are you talking about my post #23 or the post #22 (this one was send about 4 hours ago)?
-
can you show the contents of "c:\KRC\ROBOTER\Config\System\Common\ConfigXML.xml"?
I bet it is not saying OfficeLite
-
Maybe you can tell us the kss version!
You have a mada directory with all madas for your robots and kss versions
just make a screenshot of the hmi which robot type (and serial number) is connected to the label on the robot (here picture too).
anything else is trying to look into the glass ball (which is not available at the moment)
-
Another suggestion:
connect your hard drive to the primary master instead of the secondary master.
-
how are your jumper settings? picture , please
-
A lot of hdd problems are caused by broken ribbon cable - are you using the same or a new one
wrong jumper setting on HDD
missing MBR
MBR not marked as bootable
-
do you have an picture of the error message? Which could be very useful
-
-
-
I attended a few trainig courses at the "workmen's compensation board"
(German Berufsgenossenschaft)
Their regulation is and was not the result of having beer over the weekend, it was the result of investigating deathly or severe irreversible injuries.
There is a rumour here in Germany: prosecutor arrives before rescue team
-
I just wondering what kind of robot you are using.
panic mode made a test with a 25m radius and it worked well.
Normally for distance you have to expect 1/10th of millimeter and for degree 1/1000th of degree.
In your first post you mentioned the number 392869920 (for kuka, these are mm) and this means, that you are actually talking about 392.7 km. What kind of robot is that?
I did not know that kuka is selling a robot this size
-
for the router you should ask kuka
but there should be
check post #22
I have not checked but it is worth to try
-
There are even more advantages. Sometimes you should have different versions of one program.
I had Multiprog wt in versions 2.11, 3.3, 3.5, 4.71 and 5.35
If you have a customer using MWT 2.11 and you make changes to the plc program with MWT 3.3 your customer will not be very happy (he will not be able to read plc code anymore)
-
belong the picture in post #14 (HMI) and post #15 (robot label) together?
(they are different serial number and robot type)
Suggestion: get serial number from robot label and ask kuka for robot type
maybe you also need to know which KSS version you have