Have you tried turning the selector switch on the arm base to JT1, press the brake release and see if you can move the arm?
Be cautious of Jt2 & 3 as the arm can drop when you press the brake release.
Have you tried turning the selector switch on the arm base to JT1, press the brake release and see if you can move the arm?
Be cautious of Jt2 & 3 as the arm can drop when you press the brake release.
I have a list giving the pinouts for CS7B's. I may have the CS7A's.
Please confirm which one you need. What color is the cabinet?
My Rx90 manual has the CS7 included. First, you need to know if it is a CS7A or CS7B? If not designated, probably an 'A'. Is the cabinet tan (A) or gray (B)?
What specifically do you need to know?
No expierence on the CS8's
On the CS7B's changing the batteries and recalibrating them are very simple. Batteries are just wired in and turn power back on. The screen walks you through lining up the marks and letting the controller do the work from there.
Good luck.
Take care Jim. Your knowledge has been a huge help on here.
Unfortunately, sounds like more of the recent trend in customer support from Stäubli.