Agree. Problem solved. Thank you.
Posts by Mr.Czarli
-
-
please check 2.2.3 and 2.2.4 chapter.
Set the mode switch on the programming pendant to [REMOTE].
"Check that the indication of “Command mode” or “I/O and Command mode” appears on the display of the remote mode.
1. Select {IN/OUT} under the {Main Menu}.
2. Select {REMOTE}.
– The current mode status appears.The FTP server function is disabled when "Remote mode not specified" or "I/O mode" is indicated on the window"
-
And just for sure.
CUT FUSE LED also marked like D2 FUSE is not lighting if everything works corectly.
-
Kudos to you kristofv !
I repeated same steps like you describe in comment and its works.
Thousands time thank you.
-
-
Hello kristofv, do you have any possitive information from your Yaskawa guy? Did you fix it?
-
Im sure that you need enable ftp function via parameters. But i dont know that magic combination. Try to contact your local Yaskawa office.
-
I already had a communication with yaskawa guy. I mean just phone call where guy verify things on software level (universal outpus makes binary changes in external outputs). ...And card behavior is unnormal so probably broken card. But result without solution.
Thank you so much.
-
Hello to everyone.
A few days ago i turned on my robotic setup after almost a year. I remember that the last time everything working correctly. But now, relay connected on CN309 terminal cant switched on. I already tested another outputs and also another terminals (CN306) but nothing work. I can exclude wrong transistor on output because also outputs which is never used is also death. Voltage on terminal 24V is OK and two fuses in plastic case is also OK. No alarm on pendant. Everything working correctly in software level.
Then i foud in documentation CUT FUSE LED (D2 FUSE) and is not lighting. I dont remember if during normal operation this LED diode was lighting or not. I'm not sure, if is any other fuse on DPS. What is mean not lighting LED - fuses are OK or blowed fuse?
Anybody any advice or hints how to solve this hellish problem? Probably its gonna be some stupid thing.
I remember, that the last time I try some new features and i working with parameters. Somebody know about a parameter which is possible to deactivate IO ports?
Thanks for your help.
-
Hi Supikas, did you already fix it? I have a same issue with I/O card except alarm in pendant. Bouth fuses are good but outputs doesnt work.
Thank you.