Are you educated? And are you from usa? Iam from sweden:)
Posts by angorgus
-
-
Okey. No i dont have any training. Im trying to learn myself. Thank you for learning me about this. I have some questions about seamdata. How many functions do you have? I have only six and when im reading ArcWare i see there is alot more than six functions. Maybe thats option?
-
Yes that make sense to have rotator activated and then make som points and last deactive unit.
Lets say i want to weld a half moon, how many points would you recommend to do? 2, 3 or maybe 4? Arc C or Arc J?
-
The rotator. I was doing a little test programming. But the robot does not rotate with the manipulator i manual mode, is it soppose to move with it in manual?
Or how should i program a simple test? -
When im trying to move manipulator it says it does not exist.
-
My worbj data Robhold false Ufprog false and i have one manipulator installed.
-
Is it possible to share pictures here?
-
Hello!
I have done it now. 3 points on the fixture
-
Okey understood.
-
So do you mean the fixure itself or the manipulator disc, randomly 3 points?
-
Okey. I will try this! thank you!
-
I bought this robot system second hand. As far as i know we dont have weldguide, smarttac nor bullseye. So what is installed is what i wrote. Well we obviously have a macanical torch cleaning device, witch is installed.
-
Okey i understand more and more. The only thing i have done with the robot is
All axis including manipulator is configured
Revolution counter uppdated
Tcp is ok but not perfect
Arcware istalled
And a little test programming.If you have the time i would be glad if could do 1-5 steps or more to establish workobject and all to get this working. In order. I am going to weld excavator equipment. That is why i need this.
Thank you! -
okey. That sound pretty easy.
So i do not have to have 4 points on the disc manipulator?
Im a beginner so i dont know anyhing about work object
-
Hello
I have an irb 1400 with irp L manipulator that is made for welding.
I am learning to program and it works great. But now I want to use work object. I want to weld while manipulator is moving and the robot is following. Do anyone know how.Just like this
External Content www.youtube.comContent embedded from external sources will not be displayed without your consent.Through the activation of external content, you agree that personal data may be transferred to third party platforms. We have provided more information on this in our privacy policy.Any help is appreciated.
-
I have a IRB1400 M94a with 2 MHB 250L positioners. My optiondisk is broken 3HAC034467-001is someone who can share this disk ? Thanks //GG
-
Hi some one who have 3HAC034467-001 to share ? Krg //GG
-
Hi Thanks
Du you know how to install 250 L positioners ?
Krg
GG
-
Hi
I have a irb1400 M94A. Shall i use robware 2.0 or 2.1 ?
Krg
Goran
-
Hi thanks for your help
It´s a ABB 250L positioner. When i buy this robot i get original disketts but when i try to reinstall software first time one diskett get error.. I get new diskett but not sure if this i right. I can install software only for robot and it work fine with new software. When i try to install option software i get lot of questions and i don´t know if i should say yes to all...type of board etc....saved back up diskett get error to....