Hi to all. I'm using comau c5g robot. While running robot automatically last week, suddenly robot stopped in-between and showing alarm that arm 1 needs turn set operation. After I put arm1 in position and run turn set. Then alarm gone. But all the setting is changed. I need to bring back old settings which was before one month or one year. Then I've back up in my laptop which was taken on three years before. I copied that file in USB. Can anybody guide me regarding this and how to restore that back up. How can I install that back up from USB??
Posts by noormunaf276
-
-
I changed mother board and mfc card. It's working now. I don't know how and where it was damaged. But that looks like good. That's why I didn't get confused at first. Anyhow it's working now. Thank you all
-
In x961, 24v supply coming. I checked all fuses. All fuses are ok. Then I can't upload image. I don't know how to upload image here.
-
In kpc, green colour light coming. Orange light not coming. There is no sound in hard disk. But exhaust fan running. In mobile panel, display not coming. How can I reboot. Any start up or power up button in kpc???
-
Hi to all
In my company, we are using Kuka k2 240-2 robot. Kuka robot panel's is not running. Display not coming. Actually mobile panel has struck up ( hanged). So we disconnect the power supply. Then we connect the power supply, display not start. In kpc ed05, green light is coming. Exhaust fan also running. In inside panel, all drives are blinking in red and green. If anybody suggest idea to start the panel, it'll be helpful for me