Posts by pranav

hi Lemster68 ..

Action Taken:- Checked the continuity of SMB Cable and found OK.
Replaced the SMB board.

Replaced the Axis computer board.

Result:- Still issue remains same

Hi Every one.

Thanks for the Support!

I had got a flash card with proper boot up file. I had inserted and it gets read.

The LED in the status board has changed to Green from Red and its continuously blinking.

Now there is no error but Still the controller is showing "Wait in progress."

Both LED's on Service board and status indication is blinking.

Below am attaching the boot file details.

Hi Everyone

Thanks for the Continous support.

I had ABB S4C+ AUTO Controller with track. It Was Working perfectly, sometimes 33506 "Axis Computer cmd connector board 1" error has came and it got solved once the controller gets restarted.

Recently we had replaced the Controller Inside Battery(Inside the computer) after that below mentioned errors are coming.

Presently while turning ON the controller these below mentioned errors are coming.

Start up Error New Motion -9

Sychronisation Error

After booting up 33506-"Axis Computer cmd connector board 1" error is coming and Robot cant jog also.

Action Taken: Done the replacing of the SMB in the Robot Side.- But still the issue remains same.

Checked the X2 Axis computer board and found Status ed in board has no error -In green color. Also all the other status LED's in the Computer is in Ok condition.

Kindly help me to sort out this issue.

Skooter  Black  SomeTekk  RoboWeld

Hi Skooter I have a small doubt regarding the boot partition.

Can you please tell me the names or folders includes in a boot partition- Because I am having plenty of files. So that I can ensure the original clown file.

Second doubt is did I need any special software to copy the Clown file to New CF card.

Is there any card reader for reading files in old DISK ON CHIP.

Hi Skooter thanks for the reply.

While checking the old backup from info I had found the version as 3HAC6811-2.21.

I am having same name folder it contains sub-folders such as bin,language,options,robots,system,utility, install.cmd

Is this the boot partition and software you had mentioned.

hi Skooter Presently I am using CF-IDE card. The CF Card is empty and it doesn't contain any files.

Presently on TP it is showing the Wait in progress and count down. On main computer Red LED light is blinking.

The main board also replaced.

Is there any procedure for rebooting or C-start the system at present condition.

Thanks in advance

Quote from Black

if led on main board is red and you are sure hdd its ok ,then can be the Main Board,

try to clean ram memory or change the main board

,take care on robware version

Ok thanks! I will try it. Thanks@black and Skooter

Quote from el_shaff3y

dear Team

could you pls support below error massege s4c controller while movement manual or motor on

I am also facing the same issue. Did your problem got solved?

Quote from Skooter

If this CF card was plugged into an CF-to-IDE adapter and plugged into the CPU board, then that CF card was the being used as the hard drive. Removing the old CF card removed the operating system.

I am connecting the cf card directly to the board. No adapters are using. I had tried with many other cards. But still issue remains same.

Quote from Skooter

This screen is generated by the teach pendant while it's waiting to establish communication with the controller. If there is an error while it boots up, it takes an extra long time to boot up. The quick and easy thing to do is to try another teach pendant, making sure the controller is off when swapping. Power up with the controller top open so you watch the LEDs on the computer and panel unit. Please post the model of the controller (example: M98, M98A, M2000, ...) you have to get more specific help.

Hi

I am Having an S4C PLUS Controller. The Controller is not booting up while power on it just keep counting.

In CPU red light is blinking. I had changed the CF card and I think card is not getting detected.Does anyone have any solution.

Hi

I am Having an S4C PLUS Controller. The Controller is not booting up while power on it just keep counting.

In CPU red light is blinking. I had changed the CF card and I think card is not getting detected.Does anyone have any solution.

Quote from ebb

hello

can i change language in s4 controller with I-start
i can not find manual for s4 i only can find m98 s4c manual
in s4c its possible but i dont know is it possible in s4 or not.
i can not make cold start cause i dont have key disk.

Hi..can you please guide me to change the language in s4c controller