Posts by Mehrdad_ala
-
-
and this picture
-
-
and this error again
-
This picture
-
-
-
Code
This is the picture of the display output, as you can see, when the axes are not active, $peri_rdy is not activated and $alarm_stop is off. My friend, my problem is that I cannot activate my axes without using service>startup. Please, if you know how to help, I can take any picture for you. I only work with pendant, consider this
-
In the picture above, the axes are activated but through service > startup. But I still have those two errors and I don't want the axes to be activated in this way. Like you, I don't have a remote software and I work with a pendant.In this case, when the axes are activated with startup, there is no more safety stop error
-
Code
In the picture above, the axes are activated but through service > startup. But I still have those two errors and I don't want the axes to be activated in this way. Like you, I don't have a remote software and I work with a pendant.In this case, when the axes are activated with startup, there is no more safety stop error
-
Code
panic mode I don't know the reason of your speaking like this. I feel that you don't even understand my question because you give an answer that is not related at all, my question is how can I solve that problem (safety stop) and you say trust in God I am posting the photo so that you can understand that the answers are not related at all
-
-
how do I solve this problem?
-
Read this message
-
fubini
Panic mode
Sky fire
-
does anyone know why there is a safety stop here?
-
what's happened?tell me plz
-
drives not active
-
I select auto mode
-
look like this photo.S I R T1