It is not allowed to use the "space" character in the program name, use "_"
Posts by TPEF
-
-
But there are welding schedules and wave schedules.
And I need laser sensor schedules.
-
Hello, please tell me how to increase the number of schedules for the Laser Sensor, 10 is not enough.
I suppose that somewhere in the System variables, but the search did not help.
-
yes, CTRL Start -> Menu - Variables - $WVCFG - $MAX_NUM_SCH
-
it is necessary to reset the welding option to CTRL start menu
-
IF R[1]>10, jmp lbl [1]
jmp lbl [2]
lbl[1]
R[1]=0.
lbl[2]
or
IF (R[1]>10) THEN
R[1]=0.
ENDIF
-
Usually, the PR does not record the offset, but the coordinates of the point at the intersection of the search axes.
Try turning on the master flag option in the touch schedule settings: turn on the master flag, "teach" touch on the reference, turn off the master flag and try searching and then use "touch offset"