Posts by msuhadolnik

That is very useful... I'll be sure to do that moving forward next time I am in this predicament, thank you.

OK, I'll look into setting it up with line segments, thank you.

Ok, I thought so. I was fortunate that these robots are the same model, and one was cloned from the other and setting the payloads was the first thing I did... I think I should be OK to copy and load the SYSVARS file.

Hello,

I have set up a User Model for my tool containing multiple boxes to shape the tool out, and when I go into Teach Pendant to accept DCS changes, I hit "APPLY" then get the message "There are 2 or more boxes." and I can no longer APPLY the changes...

The payload information did copy over when loading the SYSVARS file. My only worry with doing that is the robots have to at pretty much the same configuration, correct? Else doing so could have unintended consequences...?

How do I export payload information to place into another robot in Roboguide. These robots will be running the payloads and I'd hate to have to configure them all over again. R-2000iB/210F running 7.70.

How do I disable the Production Data screen from popping up every time I run the robot, whether it be in RoboGuide or Real World...? Driving me nuts.

Hi All,

I am attempting to create a cell in Roboguide from a backup of an existing, programmed robot that needs to be updated to add a riser. The robot comes in at 0,0,0,0,0,0 once creating the cell from backup, but if I raise the Z value of the robot for the riser, all the [P] and [PR] values that exist need to be changed accordingly... What's the best way to do this? See attached image for where my cell is currently at.

Robot is a R2000iB/210F running. Software 7.70.