thanks for the advice, I left the default parameters after loading the system
software without reloading the last back-up. that stupid. then I tell you if I solved
thanks the leg
thanks for the advice, I left the default parameters after loading the system
software without reloading the last back-up. that stupid. then I tell you if I solved
thanks the leg
hi guys
I have a robot kuka KR3, the HD has failed and I had to reinstall Windows and the system kuka. I can not move the robot and I have the following errors:
108 - DYNAMIC BRAKE ACTIVE (which continues to be generated every 3-4 seconds)
1100 - STOPPED A4
1104 - QUIT CURRENT AXIS A4
I have a floppy kuka marked with the servo parameters, are perhaps to be uploaded somewhere? does anyone know the procedure?
thanks for the help .
cagno