Nah not as easy as that, red herring.
Hawksme do you have any comments ?
Nah not as easy as that, red herring.
Hawksme do you have any comments ?
ive been scrolling through the programs, and found the attached looks to be related to box quantity. is it as simple as deleting these lines 12 to 16?
What software do I need to view and amend the programs ?
Thanks
Hi again ive done the backup and got all the files on a usb,
ive attached a zipped file of the programs to this post.
Hi thanks for reply,
can you help me get the program to a memory stick and posted on the forum?
Hi
I run a Fanuc robot m16 with Rj3ic controller, the robot is teemed with an injection moulding machine.
The robot program is currently 250 components in the box and then does a box change. We want to amend the program to have 200 components in the box.
I’ve got the added difficulty that the labels in the program are in Dutch.
Anyone out there able to take a look at the program and assist us in making in this change?
Thanks
Hi Paul
Yes great to meet you on Wednesday,
Thanks for the images of the storage cards and we will get back to you soon.
kwakisaki I've clicked your link and seen you do consultancy, I tried calling but cant get through.
can we speak to see if you can come on site to help us?
Hi Kwakisaki
thanks for your reply and I have found the brake release switches and have been able to move the axis by hand.
I now have new problem please see picture. Unexpected shock?
here is the axis
Hi guys can anyone help me get this robot moving;
Kawasaki zx165, C control C42F-a003, Date 2001-04
We have just started to try to get the robot running, it was previously working OK when it was took out of commission a few years ago.
We are all powered up and motor will run, but the robot wont move. JT5 looks to be positioned at the end of its travel and we are getting Error -1902 Jt 5 collision or abnormal disturb is detected, and this cuts the motors.
I've looked for a manual brake release so I can manipulate the axis by hand, but I cant see the brake release switches I don't believe they are in the cabinet.
Any advice appreciated
Thanks