Thanks to all, at the end reinstalation off KSS helps
It was located on D drive.
But like Fubini says :
Since when its damaged, you will probably have similar issues soon again.
Working for now, we will see.
Thanks one more time.
Marko
Thanks to all, at the end reinstalation off KSS helps
It was located on D drive.
But like Fubini says :
Since when its damaged, you will probably have similar issues soon again.
Working for now, we will see.
Thanks one more time.
Marko
I have another hard disk, from working controler.
If I changed/copy RDC file from old one (not working),
can this help? I need to change SafeRDW file also, where I cane find him?
Thanks,
Marko
Thanks,
I tray with cold start from registy didnt help. Image file I dont hae but i find some folder with some instalations files, please see the picture in attach.
From log file I get this:
09:24:10 .Getting version from registry
09:24:10 .Version: "V5.6.12"
09:24:10 .KRCVersion: "KR C"
09:24:11 .Reading "timeOut" = "120"
09:24:11 .Reading "trayIcon" = "true"
09:24:11 !Cannot find path: "//configuration/kukaroboter.startkrc/kukaVga"
09:24:11 !Cannot find path: "//configuration/kukaroboter.startkrc/kukaVga"
09:24:11 .Starting KRC
09:24:11 .Running "C:\KRC\BIN\KukaDb.exe"
09:24:11 .CreateProcess succeeded
.Commandline: "C:\KRC\BIN\KukaDb.exe "
.Directory: "C:\KRC\BIN"
09:24:11 .Running "C:\KRC\HMI\KUKA_HMI.exe"
09:24:11 .CreateProcess succeeded
.Commandline: "C:\KRC\HMI\KUKA_HMI.exe "
.Directory: "C:\KRC\HMI"
09:24:11 .Waiting 120 secs ...
09:24:17 .WM_COPYDATA received: "Init"
09:24:17 .WM_COPYDATA received: "Start 10%"
09:26:03 .WM_COPYDATA received: "Init 20%"
09:26:11 .Timeout for splash screen
09:26:19 .Running "C:\KRC\BIN\LTCserver.exe"
09:26:19 .CreateProcess succeeded
.Commandline: "C:\KRC\BIN\LTCserver.exe "
.Directory: "C:\KRC\BIN"
09:26:19 .Starting service "KrcWmiProviderSvc"
09:26:21 .Service start pending...
09:26:22 !Service not started.
09:26:22 Current State: 2
09:26:22 Exit Code: 0
09:26:22 .Starting service "EscService"
09:26:23 .Service start pending...
09:26:24 .Service started successfully
09:26:24 .Starting service "KUKA Scheduler Service"
09:26:24 .Service start pending...
09:26:25 .Service started successfully
09:26:25 .Start sequence finished
09:30:09 .WM_COPYDATA received: "Init Softkeys 30%"
Hello everyone,
After few time update Profinet configuration and restarting robot I get this error from the picture.
I try to load default and previous files, parametars from bios also didnt help for normal start.
I there some possibility to make cold start from another way.
Thanks,
Marko