Posts by Mikepard

Did you solve it??

I've already found it

To change that option needs to be in the Options menu, change it and restart the software.

Thank you for your answer work_BR

Hi!

I need to work with a KRC5 controller in kuka sim 4.3 with KSS 8.7.X, but I can not find a robot available to work with KSS 8.7 KRC5, Maybe I need an update or maybe it is not possible with kuka sim 4.3...Do you know what model of robot can work with KRC5 or KSS 8.7 in kuka sim4.3?

How can I change the controller version to KRC5 8.7.x?

Hello guys,

I bought a new computer with win 11 and after install FD on Desk, the demo version and open a backup, I was not able to login with specialist password or another level of password. Maybe its a problem in the configuration in the Win 11 or something but I cant found a solution, I already tried to run the program in compatibility mode, administrator, assign permissions but nothing works. Did somebody has the same issue before?

I always in the beginner level :(, with my old computer with Win 10 I never had this issue, I could access with passwords at integrator and specialist level.

Quote from Dgsuarez86

Hello! can somebody explain me how to add this .euw to my ultraedit? as far as i can see it only accepts .txt files...

Thanks in advance!

You must paste the file in C:\Users\xxxx\AppData\Roaming\IDMComp\UltraEdit\wordfiles

Regards

Hello,

Ver 9.4 Rev H in the readme file doesn't mention if it is supported for Win 11, in the 9.4 rev X should be supported acording to the readme file, but maybe only for an earlier version of WIN11, because it didn't work for me and my current version of Windows 22H2.

So after install and uninstall roboguide in their different versions, the message of the permisions still there but now roboguide is working well, I can work with it

Maybe I should try with the 9.4 Rev Z, when I get it.

Thank you so much for your help!

Hello,

I always run the setups as administrator or administrator login level, the computer is new, and doesn't have any type of security (antivirus, corporative locks, etc), in the readme file of Rev V doesn't say anything about WIN 11, only in the Rev. X so I installed it but the message still there and roboguide didn't work. So I tryed to install a previous version (8.5) then unistall and then install the rev X version. Now roboguide opens, but I dont think that its working properly, cause it takes a much time to create a empty robot, and if I open a backup cell some warnings appear.

Let me know if you find another solution. As additional information I intalled roboguide in Win11 22H2 Home edition.

Thank you for your help.

I've already tried running with and without administrator privileges, also run it in "compatibility mode" but the error still there.

Hello everyone,

I was trying to install fanuc roboguide (9.4 Rev V and rev H) in a new laptop with OS Windows 11, but the setup is not working properly, Has anyone had the same problem? Is this a compatibility trouble?

Thank you in advance.

">

After pressing the but play, a new window appear apparently the configuration of the robot wasn't the same in OL and in Kuka sim so was necesary dowload somo programs (mada) from th OL to Kukasim. And at the end I was able to job the robot,

thanks for your help.

Yes it is in OL

">

I guess yes it is, but how to know if it's running properly? I have these addons installed, Maybe I need to activate something else. I'm new using the softwate, so I don't know wich addons or packages I requiere exactly.

In Officelite I've already installed VRC connection.

">

">

Hello everyone,

I have a problem with kuka sim pro 4.0, I've already able to connect it with Officelite, I can download and upload programs to OL but I'm not able to jog the robot in Kuka SIM using the keys in OL. In the help of kuka sim says that a VRC Tab must be appear (after doing click in program tab) when you select a robot, but that tab doesn't appear(VRC TAB). I don't know what I'm doing wrong or what is missing.

Thank you for yout help.

" class="messageFloatObjectLeft">

Hello,

I just want to know how did you do that freeware? which tool or software did you use? I want to do one application too.

Regards