Goodmorning kwakisaki,
We got the flash memory from a official certified Kawasaki robotics dealer, the parts are genuine Kawasaki parts. We have gotten a new CPU board, we went from a 1TA board to a 1VA board. (According to the Kawasaki service engineer this wouldn't matter) We also got a new flash memory card, but this one keeps hanging on the message: timesys-login.
The original problem was that the controller wouldn't boot, after trying initialising the controller, it wouldn't still boot. We contacted Kawasaki with this problem, they told us it was (what you described) the CPU board or the Flash memory. So we ordered both from them. After replacing just the CPU board the Controller would (american megatrends boot etc.) boot, but it kept hanging whilst booting the Kawasaki software. So we also replaced the Flash memory, after replacing the flash memory the controller booted again, but we got the message: timesys login whilst booting the kawasaki software.
We can put in a username and password. But we do not know what it is supposed to be. The OS is already installed on the Flash memory.