I have the same situation, did you manage to solve it?
Posts by Robokosta
-
-
Hello! I am creating a trajectory for the fanuc robot in sprutcam, everything is fine except for the speed, the operation is line-by-line, I cut the relief according to the stl file, I have already tried all the settings, but I just can’t achieve speed, where straight lines move according to the working feed, but where the relief and the cutter should rise and go deep very slowly, it all happens, 10 times slower. Has anyone encountered this?
-
Greetings! I created a tcp tool (a spindle for a robot), I create a unit, the slope and the trajectory work out everything as it should, but when I change the cutter (I change the offset), it does not change, why can this be? Or rather, in the simulation, it changes, but when executing the UE on the robot, it is always at the same distance from the workpiece. I will be grateful for help