Hi Guys,
I have managed to connect Roboguide to a real PLC, Thanks to everyone on the forum.
For some reason, the connection keeps cutting out every 10 seconds and I get two errors on the pendant
1. "PRIO-230 Ethernet/IP Adaptor Error (1)"
2. "PRIO-231 Ethernet/IP Adaptor Idle"
When I press reset on the pendant it reconnects to the PLC.
Did anyone experience this problem before?
AB PLC V.35
Robot Software Edition V9.30P/31
Roboguide Version 9 (Rev.ZG)
Thank you.