I replaced the batteries 5 years ago but I cant remember we’re all of them
are. I got the 4 in the base but we’re are the other two? Also is there a written procedure to rest it ribot after replacement by the batteries? The robot has been sitting unpowered for
A few years now
Also is there a welding guy who can Help program this to weld
A specific part? My customer will be willing to pay.
Thanks, john
AW-005A batteries
-
jdolecki -
November 9, 2018 at 4:39 AM -
Thread is marked as Resolved.
-
-
The encoders are connected with blue connectors.
Take them apart and on the cable going to the encoder short pins 13 and 16. That will "hard reset" the encoders.