Hi,
While running the Main program the robot at times randomly stops and gives error Syst-011 and 010. No matter if you hit abort all or cycle power the robot, it doesn't help. It keeps giving the same error.
The only way out of it is if you run the program on TP mode for a few steps and once it gets going you can turn it back on auto and it would work. That's ofcourse not an ideal way to do it so I was curious to know if you guys might have a clue what else could be the issue? Also this started happening after we have ran the same setup almost for a month now. Not sure what happened all of a sudden to cause this issue?
Thanks in advance!