I have a laptop with Windows 10 Pro loaded on it and was running RobotStudio on it. I noticed a problem with the SafeMove Calibration Offsets configuration. In Windows 10 the portion of the tab for calibrating the SafeMove controller does not appear. The attachment shows what should appear inside the red circle. Has anyone else seen this and what other issues are happening with Windows 10. The official ABB response is to use a computer with Windows 7 (which is soon not going to be a viable option). Thanks in advance.
Windows 10 RobotStudio compatibility issues
-
RobotDoctor -
September 10, 2016 at 12:03 AM -
Thread is marked as Resolved.
-
-
The official ABB response is to use a computer with Windows 7 (which is soon not going to be a viable option).
Sadly industrial manufacturers do not keep up with PC operating systems over the years I've had to keep running laptops on outdated OS with RS232 ports and 3.5" floppy drives to enable me to communicate with various bits of kit (PLC's, drives, scanners etc.) as the manufacturers lag behind PC OS's.
Even now I still remember a few DOS commands