I believe this is an ar controller its for an SC15-01 robot just need to know if I can swap the boards and not have to change any settings of programming. w1020 is on the display as well.
um 836 battery dicharge error
-
bshack13 -
June 18, 2016 at 5:37 PM -
Thread is marked as Resolved.
-
-
I had a nachi tech come down and help with this problem found that when the battery was replaced the polarity on the plug was reversed and it drained the capacitor. So when the power was turned off to replace the board it lost its memory. SO CHECK POLARITY WHEN REPLACING BATTERIES ON NACHI ROBOTS