Hello !
I'm starting with a KUKA robot but with a LBR iiwa 14 R820 and it using a Sunrise Cabinet as Controller.
I installed Sunrise Workbench, created a project, set the IP adress of the controller at 172.31.1.147, selected my robot and leave it default with a simple line in run() :
robot.move(ptpHome());
Then I tryed to Synchronize the project.
I had an error : it like like "multiple version for Deployement compatible with 1.1.0", I didn't wrote it at this time, I regret.
Then I opened to StationSetup.cat and installed the configuration.
But now, when I start the Sunrise Cabinet, I have the notification :
QuoteThe smartPAD has been locked againt user interaction.
The controller cannot access the smartPAD by the provide IP adress.
And I don't know how to fix it ! Thank you for your help..
NB : I tryed to plug a screen on the Sunrise Cabinet. After KPC has started, I am automatically loged out and the windows session password is asked. Do you have any idea where find this password ?
[size=6pt]Sorry if my english is bad...[/size]