Hi, Everyone. we are facing an error in s4c+ controller. Error No:110003, arc supervision error is coming after every welding cycle. so, we can't able to do continuous welding. we checked every parameters and process weld data. Here we are not using analog unit for welding only one digital output set on for the time of welding, that signal will generate and the actuate the power source and welding is happening.So, anyone can suggest to rectify the issue. Thank you In advance
Arc Supervision Error
-
sandeep.lerio -
July 31, 2014 at 7:25 AM -
Thread is marked as Resolved.