Hi everyone,
please, is anybody from Europe willing to come to Czech Republic to set my new KUKA KR120 QUANTEC working? My milling results are bad and and my programming experiences too. Please, make a quotation for: 1)your personal setting to working in the most accurate tolerances 2) give me basic operator-programing training. I also appreciate your recommendation which offline programing sofware to buy.
thanks
Lachov
I need expert to come to make alive my new KUKA KR120 QUANTEC for milling.
-
Lachov -
June 19, 2014 at 4:49 PM -
Thread is marked as Resolved.
-
-
Hello Lachov,
Please take a look at our website. We integrate robots very similar to the system you have. We are partnered with Delcam who make PowerMILL, this is the offline programming software that we would recommend.
If you are interested in our help, please send us photographs of your robot with further information to
-
Hello,
I'm from CR - Brno. I have an experience with robot machining and I've also tested some off-line (CAM) systems with KUKA. If you need some help, send me further information.