Author Topic: MotoSim EG-VRC-CadPack  (Read 497 times)

0 Members and 1 Guest are viewing this topic.

Offline roohparvar

  • Newbie
  • *
  • Thank You
  • -Given: 4
  • -Receive: 1
  • Posts: 9
MotoSim EG-VRC-CadPack
« on: July 29, 2018, 07:26:33 AM »
Hello everyone,
I need to import the CAD file into the MotoSim program.
Should I install "MotoSim EG-VRC-CadPack"  software?

Is "MotoSim EG-VRC-CadPack" software separate?
« Last Edit: July 29, 2018, 07:30:07 AM by roohparvar »

Offline Robodoc

  • Motoman Robot Support
  • Hero Member
  • *****
  • Thank You
  • -Given: 5
  • -Receive: 150
  • Posts: 844
Re: MotoSim EG-VRC-CadPack
« Reply #1 on: July 29, 2018, 11:31:05 AM »
You will have to contact Yaskawa.  The old original MotoSIM EG VRC lite did have a CAD-PACK you could add on (to make it a full version MotoSIM EG VRC) but your key would have to be changed to get this purchased option.  If you have a newer version of MotoSIM, there is no add on CAD-PACK, each version is separate and once again you need the key that goes with the version you have.
Robodoc

Offline RAFAEL FELIPE SCHROER

  • Jr. Member
  • **
  • Thank You
  • -Given: 13
  • -Receive: 11
  • Posts: 81
Re: MotoSim EG-VRC-CadPack
« Reply #2 on: July 29, 2018, 04:59:41 PM »
Hello roohavar.
If you have Solid Works it's possible to export the geometry in HSF format, but for new versions the CADPack isn't needed, Motosim import various cad formats directly.
Rafael Schroer

Offline svarshik94

  • Newbie
  • *
  • Thank You
  • -Given: 0
  • -Receive: 0
  • Posts: 4
Re: MotoSim EG-VRC-CadPack
« Reply #3 on: August 02, 2018, 11:38:07 AM »
Hello, what a difference MotoSim EG VRC and MotoSim VRC?
Who know when there are ComArc and laser function?
« Last Edit: August 02, 2018, 11:43:13 AM by svarshik94 »

Offline Barabashka

  • Newbie
  • *
  • Thank You
  • -Given: 3
  • -Receive: 0
  • Posts: 12
Re: MotoSim EG-VRC-CadPack
« Reply #4 on: August 10, 2018, 11:28:45 AM »
@svarshik94
MotoSimVRC Software 2018 (64Bit)
MotoVRC is a comprehensive software package for virtualisation of robot systems based on NX100, FS100, DX100, DX200 and YRC1000. MotoVRC not only allows graphical virtualisation of the robot cell, but also virtual representation of the robot system itself. Operation of the virtual robot system is analogous to that of the real robot, using a virtual teachbox corresponding to that of the real robot system in appearance and performance. MotoVRC supports multi-robot systems (twin or triple configurations, etc.).

MotoSimEG Software
MotoSimEG is a comprehensive software package for simulation and planning of Yaskawa robot systems. MotoSim uses the 3D HOOPS graphics engine – one of the leading graphics engines on the market. Import filters for IGES, SAT, HSF and other formats allow trouble-free importing of your CAD models. The internal model editor additionally allows the creation of CAD models within MotoSim.