June 18, 2019, 03:18:52 PM
Robotforum | Industrial Robots Community

 ERC/MRC/XRC

normal_post Author Topic:  ERC/MRC/XRC  (Read 3354 times)

0 Members and 1 Guest are viewing this topic.

January 17, 2013, 04:09:10 AM
Read 3354 times
Offline

Divyesh Parmar


What Is the difference between ERC/MRC/XRC controller ?

Today at 03:18:52 PM
Reply #1

Advertisement

Guest

January 17, 2013, 12:48:19 PM
Reply #1
Offline

95devils


Can you explain in more detail? 

It's like DOS, then Windows 3.1, then Windows 95.  Or a XT, then 286, then 386.

More features.
Alcohol:  The cause and solution to all life's problems

January 18, 2013, 12:53:33 AM
Reply #2
Offline

roboprof


ERC - released mid to late 1980's.  One line pendant.  CRT.
MRC - released mid 1990's.  Screen on pendant.
XRC - release late 1990's.  Ergonomic pendant, icon based.

The general controller size has gotten smaller with each newer generation, and each newer generation has featured faster robots.

And yes, there are still a lot of them around.    :top:  Especially XRC.  Some of the later XRC's are actually dual-channel compliant too!

Hope this helps

January 19, 2013, 12:56:55 PM
Reply #3
Offline

Robodoc


Better still;

XRC=old
MRC=really old
ERC=older than dirt
Robodoc

January 21, 2013, 05:12:19 AM
Reply #4
Offline

Divyesh Parmar


Thanx a lot to all....

But

What about NX & DX ?


January 21, 2013, 12:12:22 PM
Reply #5
Offline

Fabian Munoz

Administrator
Following 95devils

It's like XP, then Windows 8
There are a lot of upgrades on DX

Divyesh  If you use the search button you will find the answer to your question with more details
somar

May 20, 2019, 07:30:55 PM
Reply #6
Online

Noob1982


Every generation it gets better. Except for NX100 in my opinion XRC was better then NX100. Pendant was too big.

Today at 03:18:52 PM
Reply #7

Advertisement

Guest


Share via facebook Share via linkedin Share via pinterest Share via reddit Share via twitter