March 21, 2019, 04:22:13 PM
Robotforum | Industrial Robots Community

 DX200 Ethernet/IP Safe

Poll

Are there any end users out there utilizing Allen Bradley safety PLC with DX200 Ethernet safety?

Yes-->No issues
1 (50%)
Yes-->Having issues but working
0 (0%)
No-->Tried it but had to switch back to hardwire safety circuit due to unresolved issues
1 (50%)

Total Members Voted: 2

Author Topic:  DX200 Ethernet/IP Safe  (Read 1467 times)

0 Members and 1 Guest are viewing this topic.

May 26, 2017, 01:33:23 PM
Read 1467 times
Offline

cunaf


Are there any end users out there utilizing Allen Bradley safety PLC with DX200 Ethernet safety?

Today at 04:22:13 PM
Reply #1

Advertisement

Guest

May 26, 2017, 03:39:17 PM
Reply #1
Offline

95devils


I know a couple that are.  Don't know how successfully.
Alcohol:  The cause and solution to all life's problems

November 08, 2018, 12:40:00 AM
Reply #2
Offline

Robot_BP


Hello Gents,

I have a AB safety PLC and DX200 and looking at using the Ethernet safety. Is this possible? if so, may you share with me how to do this or refer me to the right manuals. Thanks.

November 08, 2018, 03:32:36 PM
Reply #3
Offline

95devils



November 09, 2018, 12:45:30 AM
Reply #4
Offline

Robot_BP



January 02, 2019, 07:50:34 PM
Reply #5
Online

Bzoccol1


Hello,

I am also having trouble using Safety over Ethernet and Standard Ethernet communication with an Allen Bradley compact guardlogix. Does anyone have any knowledge to share over this subject?

January 03, 2019, 03:29:50 PM
Reply #6
Offline

95devils


What kind of troubles?  Trouble is very vague.

Today at 04:22:13 PM
Reply #7

Advertisement

Guest

January 03, 2019, 03:37:56 PM
Reply #7
Online

Bzoccol1


@95devils

I figured out what was going wrong. Thanks.


Share via facebook Share via linkedin Share via pinterest Share via reddit Share via twitter

xx
Ethernet/IP Safety (EIP-Safe), R-30iB Plus

Started by ddtdustin on Fanuc Robot Forum

1 Replies
171 Views
Last post February 22, 2019, 03:58:39 PM
by ddtdustin
xx
DX200 Ethernet/IP setting

Started by calhbw on Yaskawa Motoman Robot Forum

11 Replies
8298 Views
Last post September 06, 2016, 08:34:20 AM
by calhbw
xx
Changing Ethernet IP Address of DX200

Started by jamesmarkb on Yaskawa Motoman Robot Forum

4 Replies
3263 Views
Last post May 24, 2016, 09:02:54 PM
by Fabian Munoz
xx
dx200 controller Ethernet control

Started by ROKJR2 on Yaskawa Motoman Robot Forum

0 Replies
249 Views
Last post December 03, 2018, 02:37:07 AM
by ROKJR2