Display Morekuka is using two types of udp communication. With IpConfigType="LwipAndIpnetStatic you choosed the realtime udp version.
This means, that also rsi have to choose this type of communication.
I am not able to check this, but if ip addresses, subnet masks and port numbers are set correctly for IpConfigType="LwipAndIpnetStatic" the following line should be added to RSI_EthernetConfig.xml
<PROTOCOL>UDP</PROTOCOL>
under the ONLYSEND line in RSI_EthernetConfig.xml
This will solve the problem
(In this case both partners using Realtime UDP (RtUdp))
Mixed combination will not work!
Display Morekuka is using two types of udp communication. With IpConfigType="LwipAndIpnetStatic you choosed the realtime udp version.
This means, that also rsi have to choose this type of communication.
I am not able to check this, but if ip addresses, subnet masks and port numbers are set correctly for IpConfigType="LwipAndIpnetStatic" the following line should be added to RSI_EthernetConfig.xml
<PROTOCOL>UDP</PROTOCOL>
under the ONLYSEND line in RSI_EthernetConfig.xml
This will solve the problem
(In this case both partners using Realtime UDP (RtUdp))
Mixed combination will not work!
That means the both partners only use UDP to send and receive? Do you think if I use Linux for my server side will be helpful to solve this?