Dear Experts,
I'm trying to configure a PROFIBUS Communication between a PLC S7300(Master) and Fanuc Robot(Slave).
I'm using Simatic Manager to do the program and setup the configuration on the PLC Master, I install the robot GSD file "rj3c0a2d.gsd" on Simatic manager.
Device Address
-PLC 1
-Robot 3 64 Input/64 Output Bytes
Transmission Rate: 1.5Mbps
I just can see the Slave and the communication exist, but can't see any more because say "Online:Connection could not be established. The connection partner is not responding"
Can someone explain exactly what are the parameters to be configured on the robot?...and if I need change something on Simatic Manager, please
The Fanuc documentation is unfortunately not quite understandable.
Enclosed see my pictures from my configuration.
Thanks.