Thanks.
It seems difficult to find one, but maybe a local distributor has it.
Thanks.
It seems difficult to find one, but maybe a local distributor has it.
It is fully developed.
I have KASload, but I am using Linux and KASLoad is only for Windows. However, I will try the example above.
Thank you so much for your support!
Yes, it’s a D+.
The controller has 1048576 bytes (1Mb) and not 2Mb.
I just tried to upload a large program and the available memory is almost 0%.
It hang up as soon as I select the program and I am not able to use the controller. The only solution is to initialize the system.
The code and syntax is correct. It’s just a program with LMOVE shift commands. Reducing the program into ~5000 lines works.
B.T.W Do you know if it is possible to buy the 1KK boards?
It occurs only during loading. I have tried to split the program in order to reduce the file size and it works without any issues. For me it seems to be a memory limitation causing the issue.
I just checked the memory and the controller has 1MB.
Do you know how to upgrade the memory to 4MB?
Thank you so much for the quick reply and clarifying how Kawasaki handle the firmware!
I have a Kawasaki FS03N with European Spec.
The reason for asking for the latest firmware was because of a CPU error. When I load a program with many lines of code (8000-9000 lines) I sometime receive a CPU error and the controller gets stuck. The only way to overcome the problem is to initialize the system using the DIP switch. I had the impression that a firmware upgrade would maybe solve such kind-of issues.
Hello,-
Does anyone have the latest firmware for the Kawasaki D+ Controller? I have a 1QJ40 flash memory module.
Best regards,
Nimal