Yes it is for the Generic Safety - Standard AOP.
I set up the Robot With 64 bytes of standard I/O and 8 bytes of Safety I/O
The critical thing (in my case) was to get the output RPI set correctly , That is set in the safety task not in the AOP.
I have attached a pdf with screen shots of the relevant settings.
Sorry not replaying before, that day I figured it out as well, I was taking your first post as a base but I guess you had a typo on the output assembly instance where you put "104", later I got from Kuka that it should be 1024, just like your replay to my post.
Thank you anyways, that helped me a lot.