Hello,
During the External kinematics Root Point … always have the same constante error … “Current measurement error”
Any ideas ?
Info:
KRC2 05
Re Master all Axes (done)
Thanks
Hello,
During the External kinematics Root Point … always have the same constante error … “Current measurement error”
Any ideas ?
Info:
KRC2 05
Re Master all Axes (done)
Thanks
Display More1. power down KRC
2. get new CR2032
3. replace dead CR2032 on the KPC motherboard
4. connect PS2 keyboard
5. place PWR_ON jumper of motherboard
6. powerup KRC and use keyboard to enter BIOS
7. load KUKA default settings
8. save BIOS settings and exit
I have follow this steps , check also if the battery have power
Problem solve
Thanks
Hello
I have follow all the steps … replaced battery… enter bios , load default … save
After reboot satay the same ( back screen )
Thanks
Thanks
I have try this , but i reboot always stuck on black screen and i need to junper PWR_on
I have start have in the startup ( power up) always black screen , I always need to “use the jumper “ to pass this .
Do you know what is causing this ?
Thanks in advance
More common than what?
More “offten” , was asking if this model have any particular reason fo that specific use , any specs or price.
Sorry this questions but I “new”. In this matter and I have a possibly to get one now, for home prototyping
Hi,
Why it is more common to see the model kR 210 with Kr2 for milling eps ?
Thanks