Hello, colleagues!
I ask a question whether it is possible to implement the technology of surfacing (additive) in Roboguide. Are there any options or software for this?
It is necessary to weld the turbine blades from scratch. While I am in the process of choosing a robot for this task. I would be grateful for any tips and hints.
Posts by RivalsX
-
-
You can write your own global routine
SET_CD_PARAMS()
Where can I do this?
There is a chance that he will not read this motion module anyway because of the different syntax in the KSS versions. So I was thinking of tweaking the postprocessor, if at all possible. -
Hello everyone!
I have a version of KukaSim4.0 , I need to generate a program for KSS8.3, as I know this version of Kuka Sim does not support KSS8.3, can I fix CodeGeneration by killing an extra line of code (line SET_CD_PARAMS (0)) because of which a robot with KSS8.3 falls into error. When manually killing this line on the robot, the robot reads the move command without any problems. Maybe there are some other ways to solve this problem, thank you for your help!