This can also be configured in workvisual in the arctech editor. You can also default weld error strategies for ignition and weld if needed.
Posts by CycleNorth
-
-
Hey Raynald,
I tried to make a video (I'm new to that portion of it) of how to replace motion moves with arc moves. If that video doesn't work for some reason here's a picture
Hopefully this is what you're looking for
External Content www.youtube.comContent embedded from external sources will not be displayed without your consent.Through the activation of external content, you agree that personal data may be transferred to third party platforms. We have provided more information on this in our privacy policy. -
Like Connor1580 said and some others you can use UltraVNC and view it from another monitor, this is what i've done for trainings or if someone wants to monitor the teach pendant remotely. We have a document i've used for this i've attached it below
Hopefully that helps out
-
It might be worth remastering every axis with the MEMD if you have one, I've ran into similar at some customers and it turned out they mastered with "Dial" and just got it close
-
I know this post is old but i've written a work instruction for configuring Arclink XT with KUKA KRC4
From KSS8.3 to KSS 8.6 this applies
From ATB 1.2 to ATB 1.5 lincoln does not have their own KOP in WoVFrom ATB 3.0 to ATB 3.3 you will need to also have Arclink XT KOP in WoV to configure
If you have any questions let me know!