Posts by Timothy Mehring

I did check the other ROs as well as had all the ports open. some of the ports had air running through them because they are meant to have an external solenoid.

Thank You all for your help. I just opened up the side covers to try to see the solenoids, Man is it cramped space, and it is really hard to see them. see picture. when I cycle through the RO I do not see a light or here a click from a solenoid. Which means they do not exist or they are not wired.

Let me make sure, The solenoids are located in the block that houses the 6 ports right.

Alright, I cannot seem to figure this one out. I am a high school teacher with a Lincoln Classmate Cell that has a ARCMATE 50 id 7L (LR Mate 200 id 7L) I took off the welding head and replaced it with a Schunk Pneumatic Gripper so I can have an extra robot running in my classroom. I have the pneumatic lines hooked up ports RO1 and RO2. I have Air hooked up to Port 2 on the Rear of the robot. When I cycle the RO1 and RO2 which has been paired, on the teach pendant the solenoids wont activate. What am I missing?

Thanks for your help in advance!!!!!