Thanks guys
Posts by Enio
-
-
Hello everyone, we are having trouble with an old S3M92 robot, for now we can't define the DSQC 223 board , can't find the DIG + input menu, can someone tell us the correct path to that menu , thanks
-
Thanks Skooter of
-
Hello everyone , we are having troubles with an old S3 M92 robot, does anyone know the procedure to define IO board
Thanks
-
-
-
-
-
Hello, you can open on a pc the program with an text editor , and delay the tool0 on the program module and reload it
-
Hello everyone one, I have an old S3 M93 welder with external axes , (interchange table)
that is giving me a lot of trouble,after have replaced the SMB board i cant load the parameters and shows me error code 508 -7 , I load the parameters from prom but now don't recognize the external axes,the robot works as well but without external axes, I can't get out the floppy parameters ,I think becous the format which I can't read them on pc ,I have try with old pc and USB adapter floppy reader, nothing works.So if anyone has the parameters it will help .Or some way to get the parameters out of the floppy disc which I think is a 720kb one.i have uploaded a photo of the floppy drive that doesn't work anymore.Thanks in advance guys
-
Thank guys, however my problem now is get the parameters out of the floppy and copy them in a usb sticka to use with an emulator
-
Thanks Skooter as always very helpful, what kind of format is needed for S3 floppy .
-
The error code is 7 and sometimes 30 but in error list id doesn't exist nr 7,I try to use a floppy reader from a S4 but still the same
-
Hello friends.
We are asking for help with an old S3 M93 welder , we are not able to load parameters and programs from disc(floppy) we have only load basic parameters from prom,it shows us 508 error,can somebody help us understand what's going on,
Thanks in advance
-
Hello , mos of the cases I have this issue is due to resolver cables , check any brocken shield part in the resolver cables .
-
Hello ,I have a problem with an old S3 M93 with external axes, suddenly there are red light turned on in the DSQC 223 and 224 board and the system don't recognize anymore the external axes, I have rebuild the DSQC 241 board some days before,can anyone help me with this issue, thanks
-
Thanks 👍
-
Hello friend,
Did anyone know a way to read Abb S3 controller floppy disc in pc
-
Thanks my friend
-
Thanks my friend,i have already check the switches maby is the cable broken.