Posts by Riccardo Castiglia

sorry to say i did't , i would contact abb but with me it wasn't very elpful since they din't respond to any emails,

it is a red led turned off

it is one phase 230v and it gives it

i tried cheking it and povering it with the grid current but it doesn't work what should i do?

exactly not lid, im using a generator and should be ok right?

it still doesn't, and the light for the power supply isn't led while the io boards and the one on the right are all on fault

do someone know if you can boot up a robot without the robot and ioc attached?

itwould have to move slowly and avoid people, this is the hard part probably the sensors and havong reliable ones will trow you off budget even if as last resort you use a string

ok thanks ill try it, and in case can i buy any dsqc 335 and 325 or is it more specific?

Ioc. 000 0% loaded or Ioc un loadable and then asks to restart again the procedure

If you have robot ware I would like to compare it with mine thanks

now i get the error can't read ioc file what should i do?

thank you

thank you so much , do you also have the other ones? them would be useful since i don't know ywìet id them are corrupted and odds are htey are. thank you so much

the corrupt disk is the original one, the ioc file won't load, ill try with the ioc you sent thank you,, that is for rw 1.08 right? or for what? thank you

robotstudio as far as i know is by number only please tell me more id like to know

robotware 2.1 for an s4

as far as i know with older versions of robotsudio comes the robotware i and many people need, does someone have it or know how to get it?

it would be very helpful for a lot of people

thank you for those manualas but i'm interested in the os one disk i think is compromised thank you so much for all the help

i have the 3HAB2333-1/07 thanks