Posts by Vaneltin

I have two solution :

1. Use the coment tool via http. Exemple : http://192.168.1.3/karel/ComSe…27test%27&sIndx=280&sFc=3 . It modify the comment of the PR[280] with a string 'test' and with a robot ip adress '192.168.1.3'.
2. It's possible tu use a karel program, load a text file and launch the karel program to change the comments. I send you the karel program and the text file.

Thanks. I'm going to see it.

I haven't found it, do you have a link or something please ?

Hi!

If you know:

1. The velocity of the conveyor
2. Where the robot will place the object
3. A signal to indicate to the other robot when it place the object..

You should calculate/derteminate if there is something or not on the conveyor.

Thanks for your answer.

Well, I think I'm going to find another solution to modify in offline the register and PR comments.

May be I could connect me via ftp or http to the robot and modify the comments.

Hi !

I'm trying to modify the numreg.vr and the posreg.vr in offline without roboguide.

My goal is :

1. Save the numreg.vf/posreg.vr file on my computer
2. Modify it on my computer
3. Send the modified file to the robot

So my first idea is to do :

1. Save the file numreg.vf/posreg.vr from my robot and copy it in my computer : No problem
2. Convert it to txt file : I saw something like "kconvars"...
3. Modify the text file : No problem
4. Convert it to .vr file : There is something similar to kconvars ?
5. Send to the robot : No problem

Do you have any ideas ? Do you think it's possible ?

Thanks for your help !