Posts by Mohammed Alrawni

have you updated the UR softwear , also try to uninstall the UR cap and reinstall on robot latest version

Hi Scot ,

can you share picture of the gripper , as i have similar one

thanks AL for this advice ,

the version i have is 0.9.5.8 (64 bit).

i obtain it from KRG when i visited them more than 2 years ago ,

i have tried to attach the setup file here but it was not possible

i took a screen capture i hope it can help

in replay to your question :

after entering 894 it opens the CF backup than in file name selection i select my usb , BTW it was by mistake i found out about the CF backup really

the file backup.as i name it that way , i created it from save/load than file type All , so i really hope it got all the data

i really appreciate the support

Hi all ,

we recently purchased Kemmpi A7 MIG Power Sorce 350 and we want to configure it to work with Kawasaki RA006L

what i did :

i used fieldbus communication protocol between the kemppi and Kawasaki E01 controller

ethernet cable will be connected from the kemppi to the E01 controller .

what i'm looking for is the kawasaki internal signals to do signal mapping with kemppi ,

i used lvl 3 and searched in the Aux but i couldn't find it , any idea ?

thanks in advance

thanks for the reply , kindly see the image .

as i remember there is a way to do the backup you need to use the dip-switch .

ya i'm connecting the controller to my laptop ,however i'm using Kawasaki new programming softwaer KIDE .it can do the same plue the programming no need to use the notepad .

now i selected the usb it's okay i did the CF image backup function and the file size is 500 mb .

this is my first time trying this backup method so will this be enough ?

Hi all ,

i'm trying to create backup for my E01 controller , as i will be connecting Kemmpi welding machine

i forgot the steps ,,and i searched on all the manuals but no point

what i did :

from save/load option ,i saved all the data into usb

i typed on the aux page 894 it open CF image backup function , but i couldn't select the usb

any help will be appreciated