Posts by UM9745

UM9745 · FANUC Arcmate SWAP UM9745 November 5, 2019 at 8:42 PM

Wow...That was extremely easy. Just hooked up the externals, amplifier and axis card on main CPU. PREV-n-NEXT start and changed the settings. Thanks for the nudge.

UM9745 · FANUC Arcmate SWAP UM9745 October 31, 2019 at 11:45 AM

Thanks K, I considered the 120iB to have a different amperage as well. I am going to switch the external axis over today, I will post my findings later today.

UM9745 · FANUC Arcmate SWAP UM9745 October 28, 2019 at 5:55 PM

I have 2 FANUC Arcmate robots both with RJ3iB controllers. One is a 100iB and the other is a 120iB. The 100iB arm itself is no longer usable but the controller and external positioners are good. The 120iB is still in great shape but does not have any external axis, it is a stand alone. Can I swap out just the robot (manipulator) with the 100iB controller so that I can utilize the external axis.

Advertising from our partners