Yeah, as a total beginner that i am, it was due to the TCP being out of the work envelope.
Posts by Sergiu Pargras
-
-
-
I am not sure, i am an absolute beginner. I am running a milling program using MOTO-DCI, but i do believe that the hold command is coming from the PLC because i just pressed play.
-
Hello! I have a problem similar to this, when i hit start, the robot moves towards the starting position but shortly, the robot stops and the Hold button lights up and then it does not move any further. I have checked if the job works in the teach mode using test start and it seems to not have any problems, i need to mention that i have ran different operations using the same procedure.
Any help is appreciated,
I am a beginner and i operate an ES-165N-100 with NX100 controller.
Thank you