Posts by Max Pegankin

Thank you for the information and manual, that is a great start for me.

I will try to contact KUKA about the KMC manual.

Any manuals or instructions how to create mada?

3 days of KUKA support cost arm and leg. They also said that robot is too old, and suggested to purchase KRC4

I need to copy files from robot to PC, change it and move back to robot? Correct?

Thank you guys , you gave me a hope.

I have the RDW board, only board without a box. I have a pinout, connected only one motor to the position of the 7th axis, but it has an error. Red LED is blinking on the board and some errors about RDW on the start up, but I can't say is it about this axis, or about other missing axis. Is it the right way?

Do I need to connect other motors?

How to switch controller to use only three axis?

How to simulate missing axis?

Hello,

I have a KRC2 ed05 cabinet, used for 7 axis control with a robot before.

The robot is gone. Can I use this cabinet to control only the external axis? Is it possible?