Posts by Sw0028

    Hello,


    Looking for some help on whether these changes would work as intended to a fanuc program;


    I've never made changes and only really used the pendant to move and abort/start programs.


    We have a part of the program which waits for the head at the end of the robot to change position when it changes pallet, it waits until done so, I want it to now turn a DO on when waiting and off when it finishes;


    The original code is below.


    LBL{10:Pallet 2] ;


    IF R[2:No PLC Heartbrat] = 1, Jump LBL[101]


    IF DI[17:Vacuum Pump OL] = ON, Jump LBL[100]


    RO{1:EOAT PALLET 1] = Off ;


    RO[2:EOAT Pallet 2] = ON ;


    Wait RI[1:EOAT S1 @ PAL2] = ON AND RI[4:EOAT S1 @ PAL2] = ON ;


    AND RI[3:EOAT S1 @ PAL2] = OFF AND RI[2:EOAT S1 @ PAL2] = OFF ;


    Now I wanted to add the DO to come on at the same time as the wait and then go off if the below logic is true.


    LBL{10:Pallet 2] ;


    IF R[2:No PLC Heartbrat] = 1, Jump LBL[101]


    IF DI[17:Vacuum Pump OL] = ON, Jump LBL[100]


    RO{1:EOAT PALLET 1] = Off ;


    RO[2:EOAT Pallet 2] = ON ;


    DO[20:PAL2 WAIT] = ON ;


    Wait RI[1:EOAT S1 @ PAL2] = ON AND RI[4:EOAT S1 @ PAL2] = ON ;


    AND RI[3:EOAT S1 @ PAL2] = OFF AND RI[2:EOAT S1 @ PAL2] = OFF ;


    DO[20:PAL2 WAIT] = OFF ;


    I have an idea how to edit by following some guides so just would like some guidance on whether this would work or if not why, thanks in advance!

Advertising from our partners