Hello,
I'm having a the same problem, We bought the robot second hand and the default password has been changed.
I do not have a back up from when it was 1111. if someone could tell me the code or how to decipher it would be great.
Many thanks,
Hello,
I'm having a the same problem, We bought the robot second hand and the default password has been changed.
I do not have a back up from when it was 1111. if someone could tell me the code or how to decipher it would be great.
Many thanks,
Hello,
I'm new to this forum and having an issue with one of my robots and hoping for some help.
I have recently required an Fanuc arc mate 120ic attached to a Lincoln Electric i400. I can get the robot welding on t2 mode.
On auto i can get it welding when i turn on the weld input for arc enable, same as simulating the digital input for the weld enable.
Is there a way to turn weld enable/Disable via teach pendant on auto when tp is turned off?
I have a rj2 and rj3 which will allow me to do so, Shift+ weld enable.
As usual, for my workplace anyway, there are no manuals or any info from where we bought the robot, and i don't want the operators to be altering the di/wi/d0 if can be helped.
Any help will be greatly appreciated,
Many thanks,
Rich.