Hello, I have a problem with the nx100 motoman, the alarm 4110 pops up, I replaced the sensor and the cable, the problem has not disappeared, I have replaced the entire sks, but the problem still pops up when the shock sensor slows down, the robot moves but if I just want to switch it to an automatic machine, an error immediately pops up.
Posts by Plal1609
-
-
Code
hello i have a problem with motoman nx100. namely, the axes fell and I set the zero point again. I set the program, everything, okay, there is only one problem, the table does not want to rotate on the master, it is on "WAIT SOUT # (56) = ON" is in the working mode and nothing happens. I will add that if I set it to the next point, the table will move normally.
-
-
Anyone can help ?:/
-
-
-
-
hello i have a problem with otc daihen fd11. well, someone has changed the password to change the user level (expert, integrator) how to reset or restore the password?
-
hello I have a problem with the robot otc fd11 and so after replacing the battery I get an error message E0052 encoder battery charger low. the robot does not want to move the batteries are new from what I read it is necessary to reset the encoder. here's the question of how to do it. thank you in advance for your help