Posts by daniel.piton
-
-
-
-
-
-
-
como apagar Backup Automatico do robô panasonic TB1800 esrta dando memória cheia e fática dando erro não Backup: wallbash :: Socorro :: Socorro:
-
Hello my friend you have to do the real robot calibration with the virtual one.
-
How to insert Shortcut in TP Fanuc Arc Mate 120IC
How to insert Shortcut in PT Fanuc Arc Mate 120IC
I have a Robo in my company Arc Mate 120 IC and I can't get shortcuts in TP anyone who can help me -
how to configure a fronius welding machine in a Robo Fanuc with the R-30iA controller, I have here in my company the robo fanuc with the kempii machine and I have to replace it with the fronius welding machine but I do not know how to configure it, thank you in advance
-
Panasonic TB 1800 .eu I am not conceiving to do the TCP of my Robot, I do all the procedures as the manual says But the TCP is always out, I already did the Masterization of the Robot I zerei all the axes but even so I do not sure the tcp in the method of 6 points if someone has some tips please help me. Thanks
-
when I go to move axis 5 and 6 of always this error
-
I'm having this error in one of my Robots (SRVO-073 CMAL alarm (Group:% d Axis:% d) and every time I reset the incoder (the pulse controller) the theft resets the error but when I move the axis 5 or 6 of the same error someone help me thanks.
-
INTP-348 (%s^4, %d^5) Write I/O value failed
Cause: KAREL program error. The digital output signal cannot be output.
Remedy: Refer to the error cause code. Use MENU to display the Alarm Log screen. -
3.18.10.68 SRVO-068 DTERR alarm (Grp:%d Ax:%d)
Cause: A request signal was sent to the serial Pulsecoder, but no serial data was returned.
Remedy:
1. Check the connection of the cable between the Pulsecoder and servo amplifier. (If the alarm
is occurred at robot axes, check the connection of the robot interconnection cable (for the
Pulsecoder)).
2. Check the shielding of the above cable is connected securely to the grounding plate.
3. Replace the Pulsecoder.
4. Replace the servo amplifier.
5. Replace the robot interconnection cable (for the Pulsecoder).
Refer to the Controller Maintenance Manual for more information. -
Hello my friends of the forum I work with 3 robos fanuc 100ic and a 120ic, in here we can not configure the function TAST, TRACK, someone who knows how to help me, I tried several configurations but without a reason if someone can help me with the configuration of TAST I thank you. Sorry for my english I'm going through google translator.
-
Ola meus amigos do forum eu trabalho com 3 robos fanuc 100ic e um 120ic ,nos aqui não consiguimos configurar coretamente a função TAST ,TRACK, alguen que saiba possa me ajudar ja tentei varias configuraçães mas sem susseço se alguem puder me ajudar com a configuração do TAST eu agradeço .